Curtain Wall
YCW
752
YCW 752 is a nominal
2" curtain wall framing system which affords the same basic design
elements YCW
750OG, but with a slightly narrower sight line. YCW 752 is a low to mid
rise pressure wall system engineered for single and twin span applications. A
thermally improved pressure wall, it reduces heating and cooling losses in
climates where temperatures can be harsh. YCW 752 is easily adaptable to all
YKK AP entrances and can accomodate 1/4" or 1" glass or panels.
Optional snap-on battens or face covers are available, depending on the
requirements of the architect/designer.
YCW
750SSG
YCW 750SSG is a two-sided structural silicone glazed curtain wall system designed for low to mid rise applications. A 1/2" wide weather seal joint at the exterior of the intermediate verticals replaces the 2-1/2" face member and provides an uninterrupted appearance for the glass facade. Perimeter and intermediate horizontal members are thermally improved to provide enhanced thermal performance for the system. Various depth back members and reinforcing are available to meet the design requirements economically, and all fasteners are concealed to provide a clean look.
YCW 750SSG is a two-sided structural silicone glazed curtain wall system designed for low to mid rise applications. A 1/2" wide weather seal joint at the exterior of the intermediate verticals replaces the 2-1/2" face member and provides an uninterrupted appearance for the glass facade. Perimeter and intermediate horizontal members are thermally improved to provide enhanced thermal performance for the system. Various depth back members and reinforcing are available to meet the design requirements economically, and all fasteners are concealed to provide a clean look.
YCW
750IG
YCW 750IG is an inside glazed, thermally improved pressure wall system primarily designed for low to mid rise applications. Since 1/4" and 1" glazing panels are set from the interior of the building, expensive lift stages and/or scaffolding are virtually eliminated. This system can be easily adapted to incorporate all YKK AP entrances. Various depth back members and reinforcing are available to meet design criteria economically, and all fasteners are concealed. Optional battens or face covers are also available.
YCW 750IG is an inside glazed, thermally improved pressure wall system primarily designed for low to mid rise applications. Since 1/4" and 1" glazing panels are set from the interior of the building, expensive lift stages and/or scaffolding are virtually eliminated. This system can be easily adapted to incorporate all YKK AP entrances. Various depth back members and reinforcing are available to meet design criteria economically, and all fasteners are concealed. Optional battens or face covers are also available.
YHC
300OG
YKK ProTek™ YHC 300OG is an outside glazed curtain wall system specially designed to resist the fierce cyclical pressures and projectiles associated with hurricane-force winds. At the same time it provides high performance protection against air and water infiltration. The system is thermally improved, helping to reduce heating and cooling losses. It is designed for single and multi span applications, and accommodates glazing thicknesses of 1/4" & 3/8" for monolithic glass or 1" insulated units. YHC 300OG utilizes Dupont SentryGlas® Composite adhered with Dow Corning 995® Silicone Structural Adhesive. The system may be adapted to incorporate other YKK AP Hurricane Resistant products such as the 35H Entrance and YHS 50 Storefront Framing System.
YKK ProTek™ YHC 300OG is an outside glazed curtain wall system specially designed to resist the fierce cyclical pressures and projectiles associated with hurricane-force winds. At the same time it provides high performance protection against air and water infiltration. The system is thermally improved, helping to reduce heating and cooling losses. It is designed for single and multi span applications, and accommodates glazing thicknesses of 1/4" & 3/8" for monolithic glass or 1" insulated units. YHC 300OG utilizes Dupont SentryGlas® Composite adhered with Dow Corning 995® Silicone Structural Adhesive. The system may be adapted to incorporate other YKK AP Hurricane Resistant products such as the 35H Entrance and YHS 50 Storefront Framing System.
YHC
300SSG
YHC 300SSG joins the other YHC 300 curtain wall framing systems in providing certified hurricane resistance. YHC 300 SSG is a two-sided structural silicone glazed curtain wall system that enables architects to design a building with a clean line glass facade uninterrupted by intermediate vertical covers and at the same time provides protection from major storms. Perimeter and intermediate horizontal members are thermally improved to provide enhanced thermal performance for the system. YKK AP hurricane resistant entrances can be incorporated into the system as well.
YHC 300SSG joins the other YHC 300 curtain wall framing systems in providing certified hurricane resistance. YHC 300 SSG is a two-sided structural silicone glazed curtain wall system that enables architects to design a building with a clean line glass facade uninterrupted by intermediate vertical covers and at the same time provides protection from major storms. Perimeter and intermediate horizontal members are thermally improved to provide enhanced thermal performance for the system. YKK AP hurricane resistant entrances can be incorporated into the system as well.
YHC
300IG
YHC 300 IG is similar to YHC 300 OG in that it provides proven protection against fierce cyclical pressures and large projectiles associated with hurricane-force winds. Glass is installed from the interior of the building to reduce both construction time and cost. Separate glazing details exist for Large and Small Missile Inpact conditions. Designed for single and multiple span applications, YHC 300 IG accepts 1/4" & 3/8" DuPont SentryGlas® for Large Missile areas and 7/16" & 9/16" laminated glass for Small Missile areas. The system provides excellent protection against air and water infiltration, and it is thermally improved to reduce heating and cooling costs. Hurricane resistant doors by YKK AP, shuttered or non-shuttered, may be installed into the curtain wall to complete the entrance area of the building.
YHC 300 IG is similar to YHC 300 OG in that it provides proven protection against fierce cyclical pressures and large projectiles associated with hurricane-force winds. Glass is installed from the interior of the building to reduce both construction time and cost. Separate glazing details exist for Large and Small Missile Inpact conditions. Designed for single and multiple span applications, YHC 300 IG accepts 1/4" & 3/8" DuPont SentryGlas® for Large Missile areas and 7/16" & 9/16" laminated glass for Small Missile areas. The system provides excellent protection against air and water infiltration, and it is thermally improved to reduce heating and cooling costs. Hurricane resistant doors by YKK AP, shuttered or non-shuttered, may be installed into the curtain wall to complete the entrance area of the building.
YCW
250SSG
YCW 250SSG is a two-sided structural silicone, stick erected, inside glazed curtain wall system designed for low to mid rise applications. The system utilizes concealed fasteners, accepts 1/4" and 1" glazing panels, and provides minimal exposed aluminum surfaces. YCW 250SSG is thermally improved to help reduce heating and air conditioning losses. Similar to YCW 250, exterior and interior finishes may be varied. Various interior covers and trim that allow for a wide selection of system depths and optional snap-on battens or covers are available to suit design needs.
YCW 250SSG is a two-sided structural silicone, stick erected, inside glazed curtain wall system designed for low to mid rise applications. The system utilizes concealed fasteners, accepts 1/4" and 1" glazing panels, and provides minimal exposed aluminum surfaces. YCW 250SSG is thermally improved to help reduce heating and air conditioning losses. Similar to YCW 250, exterior and interior finishes may be varied. Various interior covers and trim that allow for a wide selection of system depths and optional snap-on battens or covers are available to suit design needs.
YCW
250
YCW 250 is an inside glazed, thermally improved curtain wall system designed for low to mid rise applications. This system offers a 2-1/2" sightline and accepts 1/4" and 1" glazing panels which are set from the interior of the building. All fasteners are concealed. Finishes on the exterior versus the interior may be varied for aesthetic and/or economic reasons. Various interior covers and trim that allow for a wide selection of system depths and optional snap-on battens or covers are available to meet architect/designer requirements.
YCW 250 is an inside glazed, thermally improved curtain wall system designed for low to mid rise applications. This system offers a 2-1/2" sightline and accepts 1/4" and 1" glazing panels which are set from the interior of the building. All fasteners are concealed. Finishes on the exterior versus the interior may be varied for aesthetic and/or economic reasons. Various interior covers and trim that allow for a wide selection of system depths and optional snap-on battens or covers are available to meet architect/designer requirements.
YCW
750OG
YCW 750OG (Outside Glazed) is a 2-1/2" curtain wall framing system designed for low to mid rise projects. The system is a thermally improved pressure wall system engineered to help reduce heating and air conditioning losses. YCW 750OG is easily adapted to accept all YKK AP entrances and offers complete systems for both monolithic and insulated glazing materials. New design features allow for all fasteners to be concealed. Various depth back members and reinforcing are available to meet design criteria economically. Optional battens or snap-on face covers are also available, depending on the requirements of the architect/designer.
YCW 750OG (Outside Glazed) is a 2-1/2" curtain wall framing system designed for low to mid rise projects. The system is a thermally improved pressure wall system engineered to help reduce heating and air conditioning losses. YCW 750OG is easily adapted to accept all YKK AP entrances and offers complete systems for both monolithic and insulated glazing materials. New design features allow for all fasteners to be concealed. Various depth back members and reinforcing are available to meet design criteria economically. Optional battens or snap-on face covers are also available, depending on the requirements of the architect/designer.